Rigging and power
CS1-CON — HD/FD conical connector
Plan the connection around identified components and the truss system. The Eurotruss catalog lists CS1-CON as a connector for FD/HD; the proposed unit, its connection hardware and the configuration each need to be verified.
Identification and scope
- Manufacturer or brand
- Eurotruss (catalog reference; unit to be verified)
- Equipment name
- CS1-CON — HD/FD conical connector
- Location
- Ask about availability and location
- Supply for the event
- Ask about options for the planned date and scope
You can start with the assembly you want to build, date and location even before the final drawing is ready. We’ll review part numbers, accessories and supply options.
Information to prepare this item
- Component identification, nameplate and documentation; actual assembly configuration.
- Assembly geometry, planned loads, supports and connections, reviewed by the qualified person responsible.
Identify the connector and connection hardware
Record the brand, full code and identification marks of each part. Gather documentation for the connector, pins, retaining components and planned truss elements; confirm which belong to the actual system and configuration.
Do not combine components simply because their shapes appear to match. Keep each part’s identification and check the assembly against the applicable documentation before planning installation.
Prepare the connection and assembly review
Gather the planned geometry, loads and their positions, supports and connections for review by the qualified person responsible. Coordinate access and assembly with the venue.
| Point | What to record | How to proceed |
|---|---|---|
| Identification | Proposed connector, connection hardware and truss system | Confirm part numbers and components against the system documentation |
| Configuration | Geometry, loads and positions, supports and connections | Request review by the qualified person responsible for that assembly |
| Condition and components | Identification, observed condition and planned parts for each connection | Resolve discrepancies or observed damage before including the part in the assembly |
Visual inspection does not replace documentation or review of the configuration. If a part is missing or its identification or condition differs from the plan, record the discrepancy and arrange evaluation or replacement before use.
Manufacturer reference and system documentation
Eurotruss: CS1-CON (FD/HD) catalog page
The official page identifies the connector and lists related parts. It does not confirm which parts a proposal includes or validate the recorded unit or event configuration. With full part numbers, we can gather the specific assembly and inspection instructions.
Topics to discuss
- Component identification
- Configuration and documentation
- Assembly coordination
- Inspection and recordkeeping
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- What to coordinate with the hotel or venue before AV setup
- Event stages: choosing size, height and access
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.