Rigging and power
BLK-SCON-ST — steel half connector with bolt
Identify the connector and corner block before specifying the connection. The Eurotruss catalog identifies BLK-SCON-ST as a steel half connector that screws onto the block; the proposed unit and assembly each need to be verified.
Identification and scope
- Manufacturer or brand
- Eurotruss (catalog reference; unit to be verified)
- Equipment name
- BLK-SCON-ST — steel half connector with bolt
- Location
- Ask about availability and location
- Supply for the event
- Ask about options for the planned date and scope
- Configuration or function
- Steel half connector that screws onto a corner block; confirm the assembly and its accessories against the applicable documentation.
You can start with the intended use, date and location even before the final drawing is ready. We’ll review the code, truss system, accessories and supply options.
Information to prepare this item
- Component identification, nameplate and documentation; actual assembly configuration.
- Assembly geometry, planned loads, supports and connections, reviewed by the qualified person responsible.
Confirm the connector and matching block
Record the brand, full code and identification of the unit and the block it is intended to attach to. Check those references against the system manual and drawing; a connector name does not establish compatibility with every block or truss.
The manufacturer’s reference describes a screw connection to the corner block. Confirm the connection hardware and instructions for the actual configuration before planning assembly.
Prepare the assembly review
Gather the planned geometry, loads and their positions, supports and connections so the qualified person responsible can review the configuration. Also coordinate assembly access and sequence with the venue.
| Point | What to record | How to proceed |
|---|---|---|
| Identification | Proposed code, manufacturer, block and truss system | Confirm the unit and connection references against the system documentation |
| Configuration | Geometry, loads and positions, supports and connections | Request review by the qualified person responsible for that assembly |
| Inspection and accessories | Observed condition, identification of parts and planned fasteners | Resolve discrepancies or observed damage before including the part in the assembly |
Visual inspection does not replace documentation or review of the configuration. If identification, condition or accessories differ from the plan, record the discrepancy and arrange evaluation or replacement before using the part.
Manufacturer reference and documentation to complete
Eurotruss: BLK-SCON-ST catalog page
The official page confirms the code and attachment to the corner block. The unit’s identification, block, connection hardware and specific instructions still need to be confirmed for the proposed assembly. This page does not assign a load capacity, bolt dimensions or tightening torque.
Topics to discuss
- Component identification
- Configuration and documentation
- Assembly coordination
- Inspection and recordkeeping
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- What to coordinate with the hotel or venue before AV setup
- Event stages: choosing size, height and access
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.