Projection and lenses
Christie UST — HS / 0.46:1 reference to verify
Plan projection around the lens part number and exact projector model. The record associates HS with 0.46:1; that identification needs review before confirming compatibility, throw ratio or mounting position.
Identification and scope
- Manufacturer or brand
- Christie
- Equipment name
- Original record: Christie HS-series UST lens — 0.46:1; part number to confirm
- Location
- Ask about availability and location
- Reference quantity or measurement
- 5 (record reference quantity; confirm units for the event)
You can start with the image you want, date, location and available space even before the final drawing is ready. We’ll review lens and projector identification, measurements and supply options.
Information to prepare this item
- Projector and lens references, actual distance, image size and projection surface.
- Signal resolution and frame rate, geometry and venue lighting conditions.
Confirm the lens and projector combination
Record the lens product code and full projector model, along with labels and proposed accessories. Check both references against Christie documentation before preparing the assembly.
Christie publishes the 0.46:1 data sheet for Jazz Series. The HS name and recorded value are retained as a reference to verify; they do not by themselves identify the unit or establish compatibility.
Prepare measurements and placement
| Point | What to record | How to proceed |
|---|---|---|
| Identification | Lens code, projector model and planned accessories | Confirm the combination and gather the applicable documentation |
| Image and distance | Image size and format, surface and measured space | Use the throw data and measurement references for the identified combination |
| Placement and operation | Position, mounting, access, venue light and signal path | Review the assembly and prepare checks according to the manual and site conditions |
Do not finalize placement by multiplying image width by the value in the record name. The applicable ratio and the point from which distance is measured must come from documentation for the actual combination.
Manufacturer references for identifying the assembly
These references help resolve identification; they do not confirm the recorded unit’s part number. With that code and the projector, we can review specific mounting, supports and preparation procedures.
Topics to discuss
- Lens selection and distance
- Signal and format
- Image geometry
- Venue visibility
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- Video and screens for events: content, size and signals
- Black screen or no image at an event: trace the video path
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.