Truss and rigging

MILOS M290B Regular Quatro: identify parts before integration

Identify series, cross-section and connection when sections and hardware come from different sources.

Identification and application

This guide covers MILOS M290 Regular Quatro identified as M290B. QTB1000 is an example straight-section reference; Quatro alone does not identify the connector. M290V/HD and other variants require their own documentation.

References for your inquiry

Identity: M290 Regular Quatro · M290B
Example reference: QTB1000; verify the complete label and connection system.

Prepare the information

Separate inventory by label, origin and condition; keep each hardware reference associated with its section.
Sketch supports, corners, loads and approximate dimensions. Record undocumented parts as unresolved, without testing mixed connections for fit.
Obtain applicable general and M290-specific manuals, connection documentation and inspection before finalizing integration.

Questions and alternatives

Can I inquire with an incomplete inventory?

Yes. Send readable label photos, known quantities and the intended function. We can study supplementing identified equipment, complete supply or an adapted layout. Missing items remain recorded; compatibility is not assumed to complete a quote.

Are Regular Quatro and HD the same equipment?

Do not select by appearance or the word Quatro alone. Check the complete code, construction and corresponding table. Do not apply M290V data to M290B or choose a variant for the highest load value.

Can a connector from another source be used if it fits?

Fit does not establish the connection. Identify receiver, connector, pin and clip references; obtain documented confirmation for the specific combination. Different connection versions do not authorize unidentified interchange.

Is the collection’s figure my installation capacity?

No. A collection groups products and conditions. The exact table must match series, revision, span, supports, orientation and load positions. Corners or bases require the complete design case and review for the jurisdiction of use.

What if a connection is loose or will not align?

Keep it unloaded and out of service. Record components and visible damage for competent inspection. Do not compensate with different pins, machining or force. Another documented assembly may be studied for the show while that unit is resolved.

What documents and services belong in the proposal?

Identified component list, supply and installation or assistance scopes to agree, and required documentation and inspections. The current specific manual and matching connection must be confirmed before assembly; a photo or quote does not authorize use.

Manufacturer sources

Sources consulted October 23, 2026.