Lighting and control

Chauvet DJ GigBAR 3 ILS

Prepare GigBAR 3 ILS with PARs, derbies and LED strip. Match DMX modes, pair the footswitch and check Black Out before resetting.

Ask GLMedia about renting Chauvet DJ GigBAR 3 ILS for your event. Availability and configuration are subject to confirmation.

Model and purpose

Manufacturer: CHAUVET DJ
Model: Chauvet DJ GigBAR 3 ILS
Model: GigBAR 3 ILS; 10052716
Effects: PARs, derbies and LED strip
Power: 100–240 VAC; 50/60 Hz
DMX control: 2 / 21 / 132 channels

Portable lighting system with effects on a bar, tripod, wireless footswitch and RF remote. It supports standalone programs or console control; this variant has no laser or moving heads.

Prepare your rental inquiry

Date, city, venue and setup, event and pickup schedule.
Intended use, area dimensions and equipment already supplied by the venue or production.
Space dimensions, desired effect and preferred control method.
Stands, footswitch, remotes and transmitters: confirm kit contents and optional accessories.

Specify equipment only or whether setup, programming, operation and strike are also needed. Scope is confirmed in the proposal.

You do not need a final equipment list: tell us the result you want and the part you need help with. Availability and scope are confirmed in the proposal.

Features and connections

PARs combine RGB+UV, derbies project RGB beams and the strip provides RGB color and effects. The remote’s Laser button has no function on this model.

Provides DMX through 3-pin XLR and ILS, D-Fi, RF and footswitch options depending on configuration. Footswitch and RF remote pair separately; neither pairing creates a DMX patch.

Prepare the system

Confirm nameplate and revision. Published consumption is 47 W at 120 V, 60 Hz and 45 W at 230 V, 50 Hz. Use grounded power without a dimmer; check circuit and regional limits before linking power.
Set the tripod on level ground away from traffic, with legs spread and load balanced. Secure the bar and adjustment knob; verify capacity before adding accessories. Overhead mounting requires secondary retention and qualified personnel.
Under DMX > DMX select personality; under DMX > Address set the start and confirm with ENTER. Match the console profile and reserve channels. Do not connect a standalone/master bar to a console-controlled line.

Questions and troubleshooting

Does the console trigger programs instead of individual effects?

02CH selects programs and speed/sensitivity rather than individual colors.

Match bar and console mode. Select the desired control level before programming scenes.
21CH groups PARs and derbies and provides strip effects; 132CH separates units and controls 37 RGB strip cells. Cells and physical LED counts differ.
Test a fixed color in each section without strobe or programs; inspect address and footprint if sections are missing.

Does the footswitch fail or operate another bar?

COMMON and BIND define which footswitch the system accepts.

Power on the footswitch and check its 9 V battery. For an isolated test, select an AUTO program and disconnect the console line.
Under SETUP > FOOT select BIND. Open Binding FOOT and hold pedal 4 until SUCCESS appears.
Check Black Out with a safe light-emission area. COMMON may accept other footswitches; BIND requires the paired pedal unit.

Does the remote behave incorrectly or leave the bar dark?

Check Black Out and RF pairing separately from the footswitch.

Black Out keeps lights off; the manual states that other remote inputs are blocked until it is canceled. Prepare for light before pressing it.
Under SETUP > RF check OFF, COMMON or BIND. Pair through Binding RF and hold BLACK OUT until SUCCESS as specified for the compatible remote.
With ILS or D-Fi, verify role, channel and hardware revision. Keep a wired patch as an independent test; do not connect USB accessories based on another GigBAR.

Quick reference

Calculation for a 512-channel universe: last start = 512 − channels + 1. Check that revision’s menu limits.
Personality	Channels	Calculated last start
02CH	2	511
21CH	21	492
132CH	132	381

Precautions

Dry indoor use only; no rain, moisture or immersion. Do not exceed 40 °C and allow 50 cm ventilation clearance.
Avoid direct eye exposure or presenting UV as harmless. Ensure stability and keep cables away from public access.
Record settings and version before reset or System Update. A menu option does not confirm an appropriate update exists for that unit.

Terms on this page

DMX: A data protocol controlling lighting functions; each model defines what its channels mean.
Patch: Assignment of fixture, profile, address and universe in the control system.
Personality: A control mode defining the channels and functions used by a fixture.

Documentation and sources

Accessed: 2026-10-22. Official product page, manual Rev. 2 and quick guide Rev. 3. Proposed checks.