Rigging and power
BLK-34 — HD/FD34 corner block
Plan the structural corner around the assembly you intend to build. The BLK-34 — HD/FD34 reference alone identifies neither manufacturer, compatibility nor capacity: first record the unit and the system documentation.
Identification and scope
- Manufacturer or brand
- Check the identification on the unit
- Equipment name
- BLK-34 — HD/FD34 corner block
- Location
- Ask about availability and location
- Supply for the event
- Ask about options for the planned date and scope
You can start the inquiry with the intended use, date and venue before you have a final drawing. We will review component identification, the proposed assembly and supply options.
Information to prepare this item
- Component identification, nameplate and documentation; actual assembly configuration.
- Assembly geometry, planned loads, supports and connections, reviewed by the qualified person responsible.
Identify the block and structural system
Record the brand, complete code and any nameplate or identification on the unit. Match that reference to the corresponding manual, drawing and accessories. The HD/FD34 name is not enough to select connections or combine parts from different systems.
Locate the block in the assembly drawing and use the documentation to confirm which components and connections apply to that configuration. Retain each part’s identification for review and assembly.
Prepare the assembly review before installation
Gather the planned geometry, loads and their locations, supports and connections. Give this information to the qualified person responsible for reviewing the configuration and coordinating assembly with the venue.
| Point | What to record | How to proceed |
|---|---|---|
| Identification | Manufacturer, code, system and documentation for each component | Confirm references and accessories against the applicable documentation |
| Configuration | Geometry, loads and positions, supports and connections | Request review by the qualified person responsible for that assembly |
| Inspection and coordination | Identification, observed condition, planned parts and assembly access | Record observations and resolve their assessment before incorporating the part |
If a part’s identification or condition differs from the plan, record the discrepancy and coordinate its assessment or replacement before using it in the assembly. Visual inspection does not replace documentation or configuration review.
Documentation to complete after identification
Once the manufacturer and model are confirmed, we can gather documentation specific to the block and system. This page assigns no load capacity, connection compatibility or assembly instructions from a generic name.
Topics to discuss
- Component identification
- Configuration and documentation
- Assembly coordination
- Inspection and recordkeeping
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- What to coordinate with the hotel or venue before AV setup
- Event stages: choosing size, height and access
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.