GLMedia — VMP worksheet: coefficients and persistence
To be completed during testing. Contains no completed results.
Event / date / operator / LED lead:
MX40 Pro: serial number / firmware:
Installed VMP / operating system / differences from V1.5.0 manual:
Exact cabinet / serial number / ID / batch:
Exact receiving card / firmware / reported driver IC:
RCFGX or NCP file / revision / manufacturer and origin:
Does it have Module Flash? Displayed state and screenshot:
Reported license / validity / manufacturer confirmation:
Displayed save destination:
Displayed read source:
Initial configuration / files / screenshots / confirmed restoration procedure:

COMPARISON (one row per unit)
Cabinet-ID | batch | pattern/signal | brightness and active correction | observed difference | screenshot
___________ | ____ | __________ | _________________________ | ____________________ | _______
Viewing conditions / exposure and white balance if a camera is used:

AGREED EXPORT AND SAVE
Selected range / Page 1 checked / IDs:
.db file / folder / date / state it was exported from:
Exact message / save recipient and scope:
Confirmed recovery procedure / person confirming:

TEST 1: PRESET (without powering off)
Initial preset / recalled preset / return / constant content:
Result before / after / return:
Exact time of change / screenshot / message:

TEST 2: POWER-OFF (with preset preserved)
Power coordinated by / units and controller powered off:
State before / after power-on / message:
Did appearance change before opening VMP or touching a control?:
Agreed recovery, performed and result:

Step | single change | source/destination | observed result | evidence | open item
____ | ____________ | ______________ | ___________________ | _________ | _________
Result repeated / date / conditions:
Open items / person responsible / approval for the event: