GLMedia — STRIDE: COVERAGE, OCCUPANCY AND SCANNING
BLANK TEMPLATE. No completed tests or GLMedia results are included.

Event / date / person responsible / plan and revision:
Manufacturer / full model / regional variant / firmware per unit:
Control: version / documentation: edition, section and link:
Serving antennas / pool / mode / network / synchronization checked:
Wired stations / groups / TALK-MUTE / who confirms the reply:

ROUTE (repeat out and back)
Time / location / direction / door open or closed / completed setup:
Audience present / expected occupancy / condition still untested:
Operator / beltpack / antenna before and after / clients per antenna:
Director’s voice received / operator’s reply heard in control:
Dropout time / audible recovery / PTP / RF / battery:
Home screenshot / PTP / single change / comparison near antenna:

PREPARED SCAN
Window outside operation or dedicated antenna / person responsible:
Selected STRIDE / physical location / previous mode / previous pool:
Antennas remaining in service / clients / pending coverage:
Operational mode Monitor: stops service, disconnects devices and
removes the antenna from the pool, according to the manual. Record before intervening.
Monitor: selected antenna / History 10–120 s: selected interval:
Time / screenshot / powered equipment / observed slots and RSSI:
Known environmental changes / unidentified source / pending:

RESTORATION AND HANDOVER
Mode and pool membership checked by / time:
Conversation and reply verified / route repeated:
Result / pending problem / untested condition / person responsible:
Alternative agreed with director / continuity plan reference:
Separate manufacturer guidance, proposed tests, and results measured
on this setup. Do not interpret colors as an already confirmed cause.