GLMedia - Shutter Fit and receiving card replacement worksheet
Record to be completed. This is not a completed test or a replacement approval.
Event / operator / date:
Goal (bands / grayscale / other):

IDENTIFICATION AND SUPPLIER RESPONSE
Panel / module manufacturer and model:
Driver IC / scan / refresh rate (separate fields):
HUB / revision / power / pin assignment:
Current receiving card / firmware:
Proposed receiving card / firmware:
Space and mounting confirmed by supplier:
Controller / firmware / VMP:
Documented compatibility (link, edition, and section):
Written confirmation from panel manufacturer:
Cabinet file prepared by supplier / version / original copy:
Generator / signal / distribution / lock observed on each unit:
Camera / firmware / frame rate / shutter / recording:
Low Latency and synchronization source recorded:

Documentation references:
- VMP V1.5.0 §9.2.4 p. 59 (PDF 63): list by model.
- MX30 V1.5.1 §6.5.3 p. 24 and MX40 Pro V1.5.1 §6.5.4 pp. 27-28: Low Latency/Genlock.
- COEX xR V1.0.1 §§2.4.1-2.4.2 pp. 13-17: reference and panel preparation.
- A5s Plus V1.3.0 Dimensions p. 7; A10s Pro V1.3.0 Shutter Fit p. 3 and Dimensions p. 7.
Do not transfer an equipment list or values from another edition without checking them.

PROPOSED TEST - ONLY AFTER CONFIRMING COMPATIBILITY
Project copy and original files / restoration procedure:
Unit tested / signal / map / content / framing:
Initial state / settings screenshot / recorded sample:
One condition changed / value / subsequent sample:
Bands / grayscale / uniformity / indicated temperature:
Phase observed after each change:
Repeat after restart / observations:
Result (pending / observed / not reproducible):
Confirmation of who performed the test:
Agreed final state / file the next operator should load:

Separate manufacturer requirements, proposed tests, and observed results.
Local guide: /technical-help/novastar-mx30-low-latency-genlock/