GLMedia — NovaStar H2 test worksheet
To be completed during the rehearsal. Does not record a test already performed.
Event / date / operator / LED lead:
Goal: native input / repeated regions / other:
H2: installed firmware and serial number:
Input card: full model / slot / version / photo:
Output card: full model / slot / version / photo:
PC: GPU / operating system / driver / application / output used:
Cable and adapters:
NovaLCT: installed version / differences from the manual:
Initial configuration: local files / screenshots / person responsible for recovery:

SIGNAL
Request: width / height / Hz / bit depth / sampling / timing:
Signal reported by the PC:
Signal received by the H2:
Selected connector and configured capacity:
Exact message if the format is rejected:

REGIONS (one row per actual surface)
Name | pixel matrix | origin X,Y | sending card/port | cabinet path | expected image | observed image
______ | ______ | __________ | ______________ | ______________________ | ______________ | _______________

REHEARSAL
Step | previous setting | single change | observed result | screenshot/image | restored to initial state
____ | ______________ | ____________ | ___________________ | ______________ | _______________________
Check borders, corners, region letters, and fine text with the event source.
Open items and person confirming them:
Repetition of result (date and conditions):
Lead’s approval for the event: