GLMedia — Console preparation for FOH and monitors
Blank worksheet. Enter actual details; checks require testing.

Event / date / venue:
Person responsible for show audio:
FOH operator / monitor operator / provider:
Requested rider / agreed alternative:
Surface / engine / racks / cards and expansions:
Software on each device / enabled extensions:
Source file / working copy / backup / person responsible:
Sample rate / audio path / clock source:

Mono and stereo sources / returns / physical inputs:
Auxiliaries / groups / matrices / physical outputs:
PA / IEM / recording / streaming: port, channel, and tap point:
Shared preamps: who controls each rack:
State per rack / gain / trim before and after / observed level:
Selected cue / parameters that should change / settings that should remain:
Global scope / individual scope / Safe: selected scope:
Recall from previous cue / sequence jump / return: results:
Plugins and licenses / insert path / agreed alternative:
Verified patch / destinations monitored / PA and IEM status during testing:
Expected result / observed result / pending / person responsible:
Operator review / date / final file version:

Guide: /technical-help/digico-quantum338-foh-monitor-consoles/
This worksheet does not record completed tests or equipment availability.

Expansion V139 — Tests not yet performed
Repeatable source / artist send / second reference destination:
Initial setting / agreed correction / result at both destinations:
Initial and final state after recall / saved file:
True Solo: input / selected bus / status / reference level:
Operator monitoring / physical output / artist system / differences:
HD96-24: full model / firmware / available manual and edition:
Communication: sender / recipient / observed result:
Working scene / expected parameter / recalled parameter:
Documentation and working copy available offline:

Expansion V140 — Comparison and recovery: complete during testing
Quantum338: channel / passage / active processing / reference level:
Mustard: compared states / observed difference / choice and reason:
Snapshot: expected setting / retained setting / state after recall:
dLive: surface / MixRack / software / manual and section:
FOH and monitors: person responsible for each setting / changes requiring notice:
Recall from each surface: parameter / expected / observed:
SoftKeys: initial assignments / result on both surfaces:
Show: file per operator / date / latest agreed copy:
Tested loading order and mode / patch and buses before and after:
Control layout / checked destinations / final copy:

Expansion V141 — Backup vocal and virtual soundcheck: complete during testing
Quantum338: channel / format / software / documentation compared:
Main microphone: name / rack / card / connector:
Backup microphone: name / rack / card / connector:
Switch and return: PA / monitors / recording / audible difference:
Tested snapshot / expected input / observed input:
Person providing the backup / agreed notification to operator:
RIVAGE: surface / engine / card / slot / firmware:
Computer: system / program / interface or driver / versions:
Recording: source / path / track / sample recorded and monitored:
Playback: track / path / channel / verified destination:
Sample rate per device / subscriptions reviewed:
VSC: included channels / sources remaining live / communication:
End of test: indicator / expected source / monitored source per channel:
Initial copy / approved copy / people responsible for verification:

Expansion V142 — Avid S6L: loading, snapshots and layouts; complete during testing
Surface / E6L engine / racks / installed VENUE / guide compared:
Received file / operator / initial copy / test copy name:
Agreed loading time / person responsible / controlled audio destinations:
Expected patch / verified source / monitored destination / difference found:
Intended inserts / versions and licenses to check:
Return to previous file: measured duration / review / people responsible:
Cue / channel / parameter / expected value before and after:
Setting to retain / scope and protections reviewed:
Observed recall / listening at destination / pending difference:
Return to initial cue / out-of-sequence jump / observed result:
Intended Layout 1 per snapshot / banking mode before recall:
Channels visible after recall / review in layout mode:
Associated snapshot saved / approved copy / date / operator:

Expansion V143 — HD96: scenes, scope and EQ; complete during testing
Exact model / firmware / current manual compared with 2021 reference:
Initial copy / test copy / open file / playlist:
Active scene / selected scene / agreed starting scene:
Master Scene: observed status / expected settings to verify:
Reviewed input and output / patch / expected value / observed value:
Channel and setting / target scene for saving / editor mode:
Save exclusion / recall exclusion / check against installed help:
Round trip between scenes / observed result / pending difference:
Monitor send / recipient / value to retain / observed value:
EQ: channel / active scene / reviewed scene / intended difference:
Selected monitoring / checked level / responsible operator:
Correction destination / result after recall / return to initial cue:
Approved copy / date / people responsible / pending items:

Expansion V144 — Yamaha DM7: Focus, rack and loading; complete during testing
Exact model / firmware / editor / installed help compared with HTML 05/2025:
Venue base copy / incoming copy / test copy:
Cue A / cue B / setting that should change / setting to retain:
Channel or group / value before / after / return:
Focus per cue: status and selection / Recall Safe: agreed exclusions:
Rack: intended processor / insert patch / expected value per scene:
Rack Allocation: name and scope verified in installed help / pending:
Rack observed after each recall / difference / record for support:
Import: data type / selection / destination verified in LOAD:
Unit mode / bus configuration / compatibility checked:
Venue matrices and patch / audio destination / person responsible:
File loading: time / observed result at outputs:
Scene recall: time / observed result at outputs:
Approved copy / date / people responsible / pending items:

Expansion V145 — DM7 editor: files, import and versions; complete during preparation
Exact console / observed firmware / venue contact responsible:
Program: DM7 Editor or DM Editor / full version / operating system:
Yamaha compatibility row / table edition / requirements checked:
Venue base file / incoming file / working copy:
Saved scene: number / title / recognizable detail:
Saved file: name / revision / path / date:
Result on reopening: scene / channel / expected and observed value:
Import Scene/Library: intended data / source / verified destination / pending:
Occupied scene numbers / agreed numbering / intended libraries:
Initial matrices and outputs / comparison after incorporation:
File approved for test / assigned console / versions reconfirmed:
File loading and recall: separate results / pending differences:
People responsible / approved copy / date / pending items:

Expansion V146 — DM7: network control and Dante path; complete during testing
DM7 model / observed firmware / network contact responsible:
For Mixer Control: IP / mask / method / physical interface:
For Device Control: IP / mask / method / physical interface:
Dante PRIMARY: IP / mask / method / physical interface:
Venue plan / duplicate addresses checked / error text:
Discovery / control / audio: separate results after agreed change:
Wireless receiver: manufacturer / exact model / firmware / channel:
Agreed path: receiver / Dante transmitter / DM7 Dante input / channel / bus / output:
PORT ASSIGN and input used by the channel / observed comparison:
Meters at each stage / listening at test destination / change made / result:
External receiver parameters recorded separately / manual reference:
DANTE Patch By / DANTE Control ID / agreed person responsible and tool:
Base file / incoming file / paths before and after loading and recall:
Applicable firmware note / edition consulted / pending setup items:
Date / people responsible / approval for testing / pending items:

Expansion V148 — Sample rate and clock; complete during testing
Exact model / console firmware / receiver firmware / Controller version:
Dante source / channel / sample rate / pull-up-down:
Dante destination / channel / built-in connector or PY64-D / sample rate / pull-up-down:
DM7 clock source / sample rate / status / card SRC if present:
Full subscription alert / SYSTEM-SYNC messages:
Saved state / other affected paths / agreed change / person responsible:
Clock afterward / subscription afterward / patch / listening / result / pending:

Expansion V149 — Card and Virtual Sound Check; proposed test
Console / firmware / installed card / Online-Virtual status:
Tx source / Rx destination / card channel / PY port / Input A-B / mix channel:
Expected input during show: live / playback / console effect:
Initial VSC / included channels / Playback In / Recording Out:
Selected return / expected patch / VSC selection before-after:
Agreed change / person responsible / meters / output / listening / result / pending:

Expansion V150 — Rio startup and settings comparison; proposed test
Full model / generation / firmware / manual and edition:
Rack / UNIT ID / responsible console / intended file / other consoles present:
Expected-observed startup mode / MUTE status / messages:
Port / HA and +48V before / rack started / console connected / selected scene:
Console bus / Dante Tx / rack Rx / physical connector / expected-observed destination:
Previous screenshot / agreed change / person responsible / listening / result / pending:

Expansion V151 — QL/CL: recall and HA control; proposed test
Console / model / firmware / file / operator controlling the preamp:
Physical device / label / ID / HA-mounted device / observed WITH RECALL:
Input connector / selected source / Dante output / receiver / monitoring channel:
Test port / HA and +48V before / agreed action / reading and listening afterward:
Device list / indicator / affected channels / previous screenshot / agreed correction:
Scene / scope to verify / pending test / observed result / person responsible:

Expansion V152 — QL/CL: scene, scope and values; proposed test
Console / model / version / file copy / operator / selected scene:
Channel / port / parameter / saved value / previous reading / expected value:
Parameter Recall Safe / channel SAFE / global scope / observed scene Focus:
Transition or jump / console performing recall / subsequent reading / listening:
Shared preamp / responsible position / screenshot before and after / pending:
Intended sequence / direct entry / observed difference / reviewer responsible:

Expansion V153 — QL/CL: Global Paste and banks; proposed test
Model / version / operator / original file / independent test copy:
Goal: retain during recall or edit saved data / show-script exceptions:
Source: channel / parameter / current value / screenshot before pasting:
Destinations: selected scenes / range / scene outside selection / previous values:
Result to complete: saved data / recalled data / listening / protection:
Bank: assignments by position / selected bank / compared screenshots:
Unselected parameter / comparison / differences / return file / pending:

Expansion V154 — QL/CL: sends and monitor operation; proposed test
Console / version / original file / copy / scene / operator:
Input number and name / MIX number and name / musician / show-script exception:
Level / ON / pan / PRE/POST saved before and after / listening to complete:
Input Recall Safe / MIX Recall Safe / SAFE / Focus / screenshots:
Global Paste source / SEND PARAMETER / selected bus / destinations / exceptions:
Check: bus outside selection / scene outside range / comparison:
Mode: SELECTED CHANNEL or SENDS ON FADER / destination / control and ON verified:
Result to complete / differences / person responsible / next test:

Expansion V155 — QL StageMix: connection, selection and dropouts; proposed test
Console / firmware / application and version / iPad and iPadOS / operator:
Console IP / IP saved in app / iPad IP and mask / SSID / Local Network permission:
Access point model / control port / location / band / connected clients:
Exact CONNECT message / time / screenshot / agreed change / pending result:
Labeled input and monitors / visible SENDS channel / follow preferences:
Selection from console and app / observed screen / values before adjustment:
Route and duration / background / first dropout / SSID during dropout:
Automatic recovery or intervention / time / listening observed separately:
Reference / single changed condition / comparison with or without dropout:
Person at console responsible / operational return / pending / next test:

Expansion V156 — MonitorMix: musician, bus and connection; proposed test
Console and firmware / phone and OS / application and version / person responsible:
Musician / device / MIX number and name / output and monitoring system:
PIN configured yes-no (do not record secret) / visible bus / recovery on return:
Test input / initial value / agreed adjustment / listening / restoration:
Another reference MIX / value before and after / comparison to complete:
Connected MonitorMix devices / test devices / Editor / StageMix:
SELECT MIXER visible / Connect message / Local Network listed yes-no / permission:
Failure step: discovery / PIN / bus / synchronization / screenshot and time:
Test without cellular data, retaining Wi-Fi / result / reference device:
Configuration retained / agreed intervention / support / pending:

Expansion V157 — MonitorMix: locks and groups; proposed tests
Console and firmware / phone and OS / MonitorMix version / person responsible:
Channel and bus / lock yes-no / ONLINE-OFFLINE / screenshot and time:
Same send on console / initial value / response / restoration:
Disable Fader Lock By Hold before-after / press / result:
Agreed restart / previous record / observed difference / cause pending:
Group: name / members / bus / individually accessible sources:
Input A-B / initial send / agreed movement / observed values:
Another bus / values before-after / listening / restoration:
Devices sharing bus / operator making adjustment / issues:
Order and groups documented / screenshots / close-reopen / pending:

Expansion V158 — TF3: sends, ON and reverb; proposed tests
Console and firmware / application and version / device / person responsible:
Channel / AUX selected in app and console / send before-after / restoration:
Reference signal / bus / assigned port / cable / monitoring equipment:
Send Pre / bus Pre Fader Send Point / screenshot and time:
Input fader test / result on meter and listening / restoration:
Channel ON test / result on meter and listening / restoration:
Button used: channel ON / Send / AUX ON / other sources present:
Direct vocal to AUX / vocals to FX / return to AUX / drawing:
Microphones feeding FX / monitored return / dry-effect-both:
Occupied FX and AUX / dedicated proposal / comparison / restoration:
Screenshots / support inquiry / response / pending items:

Expansion V159 — TF3: Ins FX to ST and return to streaming; proposed tests
Console / firmware / operator / date / scene and initial screenshots:
Need: vocal / effect / listening destination / expected behavior:
Available AUX / current user / physical output / reserved resource:
Intended path / selected FX or Ins FX / Bypass status / Wet-Dry / destination:
Wet-Dry value: reason within path / dry signal to retain:
Reference vocal / second vocal / effect inputs / pending result:
Streaming: FX / return / AUX / port / transmission equipment:
Input Pre to FX / return Pre to AUX / screenshots:
Return fader before-after / send held fixed / observed position:
AUX meter before-after / streaming listening / comparison:
Other audible paths / drawing / isolated comparison / result:
Restoration / final screenshots / person responsible / support inquiry / pending items:

Expansion V160 — Quantum338: live inputs and playback per position; proposed tests
Consoles / models / software / cards / operators / date:
Session and initial screenshots / person responsible for each segment / intended restoration:
Input to remain live / channel / port / socket / selected source:
Listen Safe observed for each socket used / screenshot / expected behavior:
Playback channel / reference track / playback system output:
Stage-to-recording path / recorded track / identification checked:
Playback-to-FOH path / ports / channel / meter and listening:
Playback-to-monitors path / link / assignments / channel / meter and listening:
Stereo track / left-right sides / format at each position / comparison:
Switch to playback / source heard on each channel / pending result:
Return to live / inputs checked at each position / responsible operator:
Copy Audio patch captured / input routing / snapshot and scope if used:
Optocore design / actual devices and clock / support inquiry / pending items:
Final screenshots / restoration / operator signature / differences to review:

Expansion V161 — Quantum338: Listen and fader response; proposed tests
Console / installed version / operator / date / show copy:
Channel / exact module / listening button / initial screenshot:
Headphones / PA / monitors / recording / streaming / people responsible:
Reference passage / state before-during-after / timbre per destination:
If Spice Rack is used: observed destination / Destructive / screenshot:
Unavailable output / person responsible / pending check:
Monitoring restored / operators’ confirmation / differences:
Fader: unit / bank / channel / position / physical movement / displayed value:
Initial preferences / screenshot / action / regular and guest operator:
One option compared at a time / response / restored setting:
Relationship to recall / cue / time / steps to reproduce:
Support record if persistent / pending items / handover contact responsible: