GLMedia — DiGiCo: auxiliaries, tap point and CG control
Worksheet for proposed tests. Results to be completed.
Event / type / date / operator / person responsible for return:
Exact console / software / editor / license / rack / firmware:
Original file preserved / copy / location / date:
Documentation reference and edition / agreed test level:

GOAL PER DESTINATION
Input | PA/wedge/IEM/other destination | should sound or be cut | intended processing
_______ | _______________________ | _____________________ | ____________________
Tap point / send status / processing / physical patch:
Meters and listening before / after / return / evidence:

COMPARISON SEQUENCE
Pass | single change | destination1 | destination2 | result | evidence
______ | ____________ | ________ | ________ | _________ | _________
Tap point / processing / Mute / Hard Mute: one condition per pass.
Was each input destination checked? To be completed.

MACRO, IF TESTED
Exact programming reviewed / affected inputs and sends:
Send that should remain off / state after each action:
Forward / return / out-of-sequence cue / file for recovery:
Do not assume programming is correct based on another setup’s result.

CG AND MIXES
CG / input list / initial configuration:
Aux Sends per group / included-excluded / screenshots before:
Selected mix / fader mode confirmed by operator:
Initial send and fader values / agreed small movement:
Values afterward / listening in both mixes / exit mode / return:
If interface and manual differ: version, screenshot, and pending inquiry.

CLOSURE
Differences / recovery performed / person responsible / evidence:
Pending / next test / date / technical setup approval:
Status: proposed / performed / repeatable / pending:
This worksheet does not establish GLMedia tests or physical validation of the show.