GLMedia — blank worksheet: return, control and talkback. No tests performed.
Event / date / person responsible / pause / camera off program:
ATEM exact manufacturer/model / software / firmware / actual input / return output:
Camera exact manufacturer/model/generation / firmware / lens / manual:
Mini BiDirect 12G: RJ-45 or SFP / unit / firmware / Converters Setup / September2026 manual:
URSA Broadcast G2: November2025 manual / actual unit and firmware:
Control → converter → network → Mini SDI Out → camera12G-SDI In / actual map:
Camera SDI Out → Mini SDI In → network → converter → ATEM / actual map:
Return picture while holding program / expected signal / actual result:
Mini ATEM Camera ID / URSA G2 ATEM Camera ID / ATEM input / screenshot:
Mini tally / camera tally / on-program test / result / pending:
Selected and agreed control / initial state / change / result / rollback:
Reference Source / external or program diagram / change only during preparation:
Do not change reference during production: the manual warns of a brief interruption.
Headset connected to Mini (5-pin XLR) or G2 camera (3.5mm jack) / model / pinout:
Mini: Headphone level / Microphone level / initial talk state / double press / final state:
G2: Program Audio Source / LCD view / Program Mix / Headset Mic / Sidetone Level:
Control speaks → operator hears / actual evidence / pending:
Operator speaks → control receives / actual evidence / pending:
Program / recording / return: audio received by each / isolation to verify:
SFP model only: module reference / format / SDI Optical or Ethernet Optical / other end:
Mini SFP LED: solid for optical SDI or flashing for2110 per p43 / final signal:
Previous state saved / rollback / actual results by function / person responsible for pending items:
Third-party SFP case: self-reported link/program tally in SDI; does not test talkback.
No universal compatibility or undocumented recipe for StudioConverter/OpticalFiber12G/ATEM.